Product Details
Model PT-10 100X Compact TDM over IP Converter
Introduction
PT-10 100X is a cost-effective solution for the traditional telecom services migrate to the IP packet network, the TDMoIP adopts the innovative TDM over IP technology, and it transports the legacy E1 data through the existing Ethernet or IP network. Compact 1U metal casting is fitting for exchange office.
The PT-10 100X is the new generation of the TDM over IP equipment with IP circuit emulation that supports transportation of 1 / 2 / 4 / 8 / 16 x E1 and 2 local Ethernet ports over Ethernet or IP network. Electrical or optical uplink Ethernet port is user definable that is flexible and useful for different network media access. All local Ethernet ports are IEEE 802.3 compliant, 10/100 Base-T auto-sensed.
Telecom provider can save a lot of access and equipment cost and generates new revenue by offering different types of service over existing Ethernet networks. It is also suitable for connecting the wireless LAN Bridge to achieve fast deployment of E1 and Ethernet services, and low down the cost of replacing the costly microwave radios.
Features
● Providing up to 16 E1 interfaces;
● Provides 4 FE electrical ports and 1 FE optical port; 2 uplink ports, 2 local data ports;
● One Ethernet uplink port can be defined as electrical or optical interface by user;
● Having the high transmission efficiency, and the transmission delay can be adjusted;
● Supporting point to point and point to multipoint application;
● Supporting E1 framed, unframed setting;
● Supporting E1 loss alarm indication;
● Adopting UDP encapsulation, and supporting different types of Ethernet transmission channels;
● Supporting Ethernet PING package function;
● Ethernet supports 10/100M self-adaptive, half/full duplex self-adaptive;
● Supporting E1 package QoS assurance;
● The equipment firmware and software support remote update function;
Specification
●E1 Interface
Bit rate: 2.048Mbps ±50ppm
Code type: HDB3 code, G.703 standard
Input impedance: 75Ω or 120Ω
Frame structure: G.704, G.706
Jitter: G.742, G.823
●Power Supply
Input voltage: -48Vdc or 220Vac
Voltage range: -36Vdc ~ -72Vdc, 176Vac ~ 264Vac
Power consumption: <10W
●Operation Environment
Working temperature: -10°C ~ 50°C
Working humidity: 5% ~ 95 % (non-condensed)
Storage temperature: -40°C ~ +80°C
|
●Ethernet Optical Interface
Bit rate: 155Mbps ±50ppm
Output optical power: ≥-15dBm
Receiving sensitivity: ≤-35dBm
Optical wavelength: 1310nm/1550nm
Optical interface connecter: SFP/LC
●Ethernet Electrical Interface
Bit rate: 10/100Mbps, half/full duplex auto
Standard: IEEE 802.3, IEEE 802.1Q (VLAN)
Connector: RJ45
●Mechanical Structure
Dimension: 440mm x 220mm x 44mm
Net weight: 2Kg
|
Order Information
Model |
Interfaces |
Model |
Interfaces |
PT-10 1001 |
1 x E1 + 2 x FE(UL) + 4 x FE(DL) |
PT-10 1002 |
2 x E1 + 2 x FE(UL) + 4 x FE(DL) |
PT-10 1004 |
4 x E1 + 2 x FE(UL) + 4 x FE(DL) |
PT-10 1008 |
8 x E1 + 2 x FE(UL) + 4 x FE(DL) |
PT-10 1016 |
16 x E1 + 2 x FE(UL) + 4 x FE(DL)
|
|
|
Application
|
Diagram 1: Point to point
|
|
|
Diagram 2: Point to multipoint
|
http://www.photel.cn/